FPGA Product Comparison Table By FPGA
| Product Code | FPGA Choice | Host I/F | Board Highlights | |
|---|---|---|---|---|
| Virtex-6 | ||||
ADM-VPX-6T2 | Xilinx Virtex-6 LX240T, LX365T, LX550T, SX315T, SX475T (FFG1759) | VPX PCIe | SDRAM : 1GByte in 4 independent banks (2GByte option) of DDR3 SDRAM @ 800MT/s (32-bit wide so 3.2GB/s) FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
ADM-XRC-6TGE | Xilinx Virtex-6 LX240T, LX365T, LX550T, SX315T, SX475T (FFG1759) | XMC PCI Express Gen2 x4 | SDRAM : 1GByte in 4 independent banks (2GByte option) of DDR3 SDRAM @ 800MT/s (32-bit wide so 3.2GB/s) FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
ADM-XRC-6T1 | Xilinx Virtex-6 LX240T, LX365T, LX550T, SX315T, SX475T (FFG1759) | XMC PCI Express Gen2 x4 | SDRAM : 1GByte in 4 independent banks (2GByte option) of DDR3 SDRAM @ 800MT/s (32-bit wide so 3.2GB/s) FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
| Virtex-5 | ||||
ADM-XRC-5T2 | Xilinx Virtex-5 LX220T, LX330T, SX240T, FX100T, FX130T, FX200T (FFG1738) | PMC PCI/PCI-X | Option of P15 connector (Pseudo-XMC) providing High Speed Serial link to the carrier SDRAM : Up to 1GByte in 2 independent banks (2G in 4 banks for LX330T, SX240T and FX200T) of DDR-II SDRAM @ 333MHz SSRAM : 8MByte in 2 independent banks of DDR-II SSRAM 2M x 18-bits @ 200MHz FLASH : 4MByte serial Flash FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
ADM-XRC-5T1 | Xilinx Virtex-5 LX110T, LX155T, FX70T, SX95T (FFG1136) | PMC PCI/PCI-X | Option of P15 connector (Pseudo-XMC) providing High Speed Serial link to the carrier SDRAM : Up to 1GByte in 2 independent banks of DDR-II SDRAM @ 333MHz SSRAM : 4MByte DDR-II SSRAM 2M x 18-bits @ 200MHz FLASH : 4MByte serial Flash FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
ADM-AMC-5A2 | Xilinx Virtex-5 LX110T, LX155T, LX220T, LX330T, SX240T, FX100T, FX130T, FX200T (FFG1738) | AMC PCIe | DSP: TI 320C6415T DSP chip with 8MBytes of ZBT memory DS2432 EPROM with SHA-1 engine SDRAM : 1 or 2 GByte in 4 independent banks of DDR-II (64M or 128M x 32-bits @ 333MHz) ZBT : 8MBytes (1M x 72-bits) ZBT connected to the DSP FLASH : 32MByte user Flash connected to the DSP FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
ADM-XRC-5TZ | Xilinx Virtex-5 LX110T, LX155T, LX220T, LX330T, SX240T, FX100T, FX130T, FX200T (FFG1738) | PMC PCI/PCI-X | Option of P15 connector (Pseudo-XMC) providing High Speed Serial link to the carrier ZBT : 48MByte of ZBT SRAM in 6 independent banks (2Mx36 each) FLASH : 4MByte serial Flash FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
ADM-XRC-5LX | Xilinx Virtex-5 LX110, LX155 (FF1153) | PMC PCI/PCI-X | SDRAM : Up to 2GByte in 4 independent banks of DDRII SDRAM @ 333MHz FLASH : 4MByte serial Flash (connected to user FPGA) FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
ADM-XRC-5T-DA1 | Xilinx Virtex-5 LX110T, LX155T, FX70T, FX100T, SX95T (FFG1136) | PMC PCI/PCI-X | Option of P15 connector (Pseudo-XMC) providing High Speed Serial link to the carrier SDRAM : 512MByte in 2 independent banks of DDR-II SDRAM 4M x 32-bits @ 333MHz SSRAM : 8MByte in 2 independent banks of DDR-II SSRAM 2M x 18-bits @ 200MHz FLASH : 4MByte serial Flash FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
ADPE-XRC-5T | Xilinx Virtex-5 LX110T, LX155T, LX220T, LX330T, SX240T, FX100T, FX130T, FX200T (FFG1738) | PCIe half width card PCI Express x8 | SDRAM : 1GByte in 4 independent banks of DDR-II SDRAM 64M x 32-bits @ 333MHz SSRAM : 4MByte QDR-II SSRAM in 2 independent banks 1M x 18-bits (compatible with Xilinx® MIG controllers) Only fitted on boards fitted with LX330T, SX3240T or FX200T. No SSRAM fitted otherwise. FLASH : 4MByte serial Flash FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
ADM-XRC-5T2-ADV | Xilinx Virtex-5 LX110T, LX155T, LX220T, LX330T, SX240T, FX100T, FX130T, FX200T (FFG1738) | PMC PCI/PCI-X | JPEG2000 Codecs - 4 ADV212 devices Dual FCN Connections Option of P15 connector (Pseudo-XMC) providing High Speed Serial link to the carrier SDRAM : 512MByte in 2 independent banks (1G in 4 banks for LX330T, SX240T and FX200T) of DDR-II SDRAM 2 x 64M x 32-bits @ 333MHz SSRAM : 8MByte in 2 independent banks of DDR-II SSRAM 2M x 18-bits @ 200MHz FLASH : 4MByte serial Flash FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
ADM-XRC-5T2-ADV6 | Xilinx Virtex-5 LX330T, SX240T,FX200T (FFG1738) | PMC PCI/PCI-X | JPEG2000 Codecs - 6 ADV212 devices Dual FCN Connections Option of P15 connector (Pseudo-XMC) providing High Speed Serial link to the carrier SDRAM : 1Gbyte in 4 independent banks of DDR-II SDRAM 2 x 64M x 32-bits @ 333MHz SSRAM : 8MByte in 2 independent banks of DDR-II SSRAM 2M x 18-bits @ 200MHz FLASH : 4MByte serial Flash FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
ADC-VXS | Xilinx Virtex-5 LX110T, LX155T, SX95T, FX70T, FX100T (FFG1136) | 6U VXS/VME VXS, VME64 | Provides sites for 2 PMC boards as well as onboard FPGA sites. SDRAM : 1GByte in 4 independent banks of DDR-II SDRAM (64M x 32-bits each) @ 333MHz FLASH : 2 x 4MByte serial Flash FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
| Virtex-4 | ||||
ADM-XRC-4 | Xilinx Virtex-4 LX80, LX100, LX160, SX55 (FF1148) | PMC PCI | SSRAM : 24MByte in 6 independent banks (48MByte available as a build option) ZBT : 6 x 1024K x 32-bits (4 banks on SX55 version) - independent SRAM clock FLASH : 16MByte Flash FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
ADM-XRC-4FX | Xilinx Virtex-4 FX100, FX140 (FF1517) | PMC PCI/PCI-X | Option of P15 connector (Pseudo-XMC) providing High Speed Serial link to the carrier SDRAM : 1GByte in 4 independent banks of DDR-II SDRAM (4x 64M x 32-bits) FLASH : 4MByte serial Flash (connected to user FPGA) FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
ADPE-XRC-4 | Xilinx Virtex-4 FX100, FX140 (FF1517) | PC (PCI Express x8) PCI Express x8 | SDRAM : 1GByte in 4 independent banks FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
ACP-FX-N2-125 | Xilinx Virtex-4 FX100, FX140 (FF1148) | cPCI PCI/PCI-X | Provides 9 channels of 14-bit Analog to Digital convertors (14-bits). SDRAM : 1GByte in 4 independent banks of DDR-II SDRAM (4x 64M x 32-bits) FLASH : 32MByte parallel Flash (connected to PCI Bridge FPGA) FLASH : 4MByte serial Flash (connected to user FPGA) | |
FPGA Product Comparison Table By Host I/F
| Product Code | FPGA Choice | Host I/F | Board Highlights | |
|---|---|---|---|---|
| PCIe | ||||
| ADM-VPX-6T2 | Xilinx Virtex-6 LX240T, LX365T, LX550T, SX315T, SX475T (FFG1759) | VPX PCIe | SDRAM : 1GByte in 4 independent banks (2GByte option) of DDR3 SDRAM @ 800MT/s (32-bit wide so 3.2GB/s) FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
| ADM-XRC-6TGE | Xilinx Virtex-6 LX240T, LX365T, LX550T, SX315T, SX475T (FFG1759) | XMC PCI Express Gen2 x4 | SDRAM : 1GByte in 4 independent banks (2GByte option) of DDR3 SDRAM @ 800MT/s (32-bit wide so 3.2GB/s) FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
| ADM-XRC-6T1 | Xilinx Virtex-6 LX240T, LX365T, LX550T, SX315T, SX475T (FFG1759) | XMC PCI Express Gen2 x4 | SDRAM : 1GByte in 4 independent banks (2GByte option) of DDR3 SDRAM @ 800MT/s (32-bit wide so 3.2GB/s) FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
| ADPE-XRC-5T | Xilinx Virtex-5 LX110T, LX155T, LX220T, LX330T, SX240T, FX100T, FX130T, FX200T (FFG1738) | PCIe half width card PCI Express x8 | SDRAM : 1GByte in 4 independent banks of DDR-II SDRAM 64M x 32-bits @ 333MHz SSRAM : 4MByte QDR-II SSRAM in 2 independent banks 1M x 18-bits (compatible with Xilinx® MIG controllers) Only fitted on boards fitted with LX330T, SX3240T or FX200T. No SSRAM fitted otherwise. FLASH : 4MByte serial Flash FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
| ADM-AMC-5A2 | Xilinx Virtex-5 LX110T, LX155T, LX220T, LX330T, SX240T, FX100T, FX130T, FX200T (FFG1738) | AMC PCIe | DSP: TI 320C6415T DSP chip with 8MBytes of ZBT memory DS2432 EPROM with SHA-1 engine SDRAM : 1 or 2 GByte in 4 independent banks of DDR-II (64M or 128M x 32-bits @ 333MHz) ZBT : 8MBytes (1M x 72-bits) ZBT connected to the DSP FLASH : 32MByte user Flash connected to the DSP FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
| ADPE-XRC-4 | Xilinx Virtex-4 FX100, FX140 (FF1517) | PC (PCI Express x8) PCI Express x8 | SDRAM : 1GByte in 4 independent banks FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
ADC-XMC-II | N/A | PC (PCIe) PCIe | Carrier card for PCI Express® based systems. Allows direct communication between the XMC sites. Supplied with a debug/adaptor board (order code ADT-XMC) for connecting 19 single ended, and 16 differential pairs to external I/O. All external I/O (single ended, differential, and high speed serial IO (HSSIO)) can be chained to nearby ADC-XMC-I/IIs for inter XMC communication. No memory on carrier card. | |
ADC-EMC | N/A | PC (PCIe) PCIe | PMC/XMC Carrier card for PCI Express® based systems. No memory on carrier card. | |
| PCI/PCI-X | ||||
| ADM-XRC-5T2 | Xilinx Virtex-5 LX220T, LX330T, SX240T, FX100T, FX130T, FX200T (FFG1738) | PMC PCI/PCI-X | Option of P15 connector (Pseudo-XMC) providing High Speed Serial link to the carrier SDRAM : Up to 1GByte in 2 independent banks (2G in 4 banks for LX330T, SX240T and FX200T) of DDR-II SDRAM @ 333MHz SSRAM : 8MByte in 2 independent banks of DDR-II SSRAM 2M x 18-bits @ 200MHz FLASH : 4MByte serial Flash FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
| ADM-XRC-5T1 | Xilinx Virtex-5 LX110T, LX155T, FX70T, SX95T (FFG1136) | PMC PCI/PCI-X | Option of P15 connector (Pseudo-XMC) providing High Speed Serial link to the carrier SDRAM : Up to 1GByte in 2 independent banks of DDR-II SDRAM @ 333MHz SSRAM : 4MByte DDR-II SSRAM 2M x 18-bits @ 200MHz FLASH : 4MByte serial Flash FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
| ADM-XRC-5TZ | Xilinx Virtex-5 LX110T, LX155T, LX220T, LX330T, SX240T, FX100T, FX130T, FX200T (FFG1738) | PMC PCI/PCI-X | Option of P15 connector (Pseudo-XMC) providing High Speed Serial link to the carrier ZBT : 48MByte of ZBT SRAM in 6 independent banks (2Mx36 each) FLASH : 4MByte serial Flash FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
| ADM-XRC-5LX | Xilinx Virtex-5 LX110, LX155 (FF1153) | PMC PCI/PCI-X | SDRAM : Up to 2GByte in 4 independent banks of DDRII SDRAM @ 333MHz FLASH : 4MByte serial Flash (connected to user FPGA) FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
| ADM-XRC-5T-DA1 | Xilinx Virtex-5 LX110T, LX155T, FX70T, FX100T, SX95T (FFG1136) | PMC PCI/PCI-X | Option of P15 connector (Pseudo-XMC) providing High Speed Serial link to the carrier SDRAM : 512MByte in 2 independent banks of DDR-II SDRAM 4M x 32-bits @ 333MHz SSRAM : 8MByte in 2 independent banks of DDR-II SSRAM 2M x 18-bits @ 200MHz FLASH : 4MByte serial Flash FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
| ADM-XRC-5T2-ADV | Xilinx Virtex-5 LX110T, LX155T, LX220T, LX330T, SX240T, FX100T, FX130T, FX200T (FFG1738) | PMC PCI/PCI-X | JPEG2000 Codecs - 4 ADV212 devices Dual FCN Connections Option of P15 connector (Pseudo-XMC) providing High Speed Serial link to the carrier SDRAM : 512MByte in 2 independent banks (1G in 4 banks for LX330T, SX240T and FX200T) of DDR-II SDRAM 2 x 64M x 32-bits @ 333MHz SSRAM : 8MByte in 2 independent banks of DDR-II SSRAM 2M x 18-bits @ 200MHz FLASH : 4MByte serial Flash FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
| ADM-XRC-5T2-ADV6 | Xilinx Virtex-5 LX330T, SX240T,FX200T (FFG1738) | PMC PCI/PCI-X | JPEG2000 Codecs - 6 ADV212 devices Dual FCN Connections Option of P15 connector (Pseudo-XMC) providing High Speed Serial link to the carrier SDRAM : 1Gbyte in 4 independent banks of DDR-II SDRAM 2 x 64M x 32-bits @ 333MHz SSRAM : 8MByte in 2 independent banks of DDR-II SSRAM 2M x 18-bits @ 200MHz FLASH : 4MByte serial Flash FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
| ADM-XRC-4 | Xilinx Virtex-4 LX80, LX100, LX160, SX55 (FF1148) | PMC PCI | SSRAM : 24MByte in 6 independent banks (48MByte available as a build option) ZBT : 6 x 1024K x 32-bits (4 banks on SX55 version) - independent SRAM clock FLASH : 16MByte Flash FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
| ADM-XRC-4FX | Xilinx Virtex-4 FX100, FX140 (FF1517) | PMC PCI/PCI-X | Option of P15 connector (Pseudo-XMC) providing High Speed Serial link to the carrier SDRAM : 1GByte in 4 independent banks of DDR-II SDRAM (4x 64M x 32-bits) FLASH : 4MByte serial Flash (connected to user FPGA) FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
ADC-PMC | N/A | PC (PCI/PCI-X) PCI/PCI-X | PMC/XMC Carrier card for PCI/PCI-X® based systems. No memory on carrier card. | |
| ADC-VXS | Xilinx Virtex-5 LX110T, LX155T, SX95T, FX70T, FX100T (FFG1136) | 6U VXS/VME VXS, VME64 | Provides sites for 2 PMC boards as well as onboard FPGA sites. SDRAM : 1GByte in 4 independent banks of DDR-II SDRAM (64M x 32-bits each) @ 333MHz FLASH : 2 x 4MByte serial Flash FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
| cPCI | ||||
| ACP-FX-N2-125 | Xilinx Virtex-4 FX100, FX140 (FF1148) | cPCI PCI/PCI-X | Provides 9 channels of 14-bit Analog to Digital convertors (14-bits). SDRAM : 1GByte in 4 independent banks of DDR-II SDRAM (4x 64M x 32-bits) FLASH : 32MByte parallel Flash (connected to PCI Bridge FPGA) FLASH : 4MByte serial Flash (connected to user FPGA) | |
ADC-CPCI | N/A | cPCI cPCI | PMC Carrier card for Compact PCI based systems. No memory on carrier card. | |
| VME/VXS | ||||
| ADC-VXS | Xilinx Virtex-5 LX110T, LX155T, SX95T, FX70T, FX100T (FFG1136) | 6U VXS/VME VXS, VME64 | Provides sites for 2 PMC boards as well as onboard FPGA sites. SDRAM : 1GByte in 4 independent banks of DDR-II SDRAM (64M x 32-bits each) @ 333MHz FLASH : 2 x 4MByte serial Flash FLASH : Configuration Flash providing an initialisation design for automatic loading into the target FPGA. | |
XRM Comparison Table by Feature Group
| Product Code | Description | Connector | Board Highlights | |
|---|---|---|---|---|
| Analog | ||||
XRM-ADC-D2/125
 | Dual 14-bit ADC Interface (125Msps) | SMA (7mm, standard), Long Barrel SMA (20mm), SMB, SMC | Dual 14-bit ADC up to 125MHz External Clock input Trigger I/O Port Auxiliary I/O port | |
XRM-ADC-D3/1G5
 | Dual 8-bit ADC Interface (1.5Gsps) | SMA (7mm, standard), Long Barrel SMA (20mm), SMB, SMC | The XRM has built-in thermal monitoring of the ADC Dual 8-bit ADC up to 1.5GHz External Clock Input External Clock Output Auxiliary I/O port Dual external synchronisation ports | |
XRM-ADC-D6/250
 | Dual Channel ADC 250Msps | SMA | Dual 14-bit ADC up to 250Msps External Clock Input Trigger I/O port Auxiliary I/O port | |
XRM-ADC-D7/500
 | Dual Channel ADC 500Msps | SMA | Dual 12-bit ADC up to 500Msps External Clock Input Trigger I/O port Auxiliary I/O port | |
XRM-ADC-S4/3G
 | Single 8-bit ADC I/F (3Gsps) | SMA (7mm, standard), Long Barrel SMA (20mm), SMB, SMC | The XRM has built-in thermal monitoring of the ADC Single ADC Input External Clock Input External Clock Output Auxiliary I/O port Dual external Synchronisation ports | |
XRM-DAC-D3/275
 | Dual Channel 14-bit DAC | SMA/SMB/SMC | Dual 14-bit DACs up to 125Msps External Clock Input Trigger I/O port Auxiliary I/O port | |
XRM-DAC-D4/1G
 | Dual Channel 16-bit DAC | SMA/SMB/SMC | Dual 16-bit DACs up to 1GHz External Clock Input Trigger I/O port Auxiliary I/O port | |
| Digital | ||||
XRM-FPDP
 | Front Panel Data Port Interface | 80 Pin FPDP Connector | Back-up batteries can be fitted. Front Panel Data Protocol Interface | |
XRM-IO146
 | High Density Digital I/O | Mictor 152 pin | Back-up batteries can be fitted. 146 discrete digital I/Os LVDS/LVTTL | |
XRM-IO146-ROCKET
 | High Density Digital Serial and Parallel I/O | Mictor 152 pin | Back-up batteries can be fitted. 7x High Speed Serial I/O 112 discrete digital I/Os LVDS/LVTTL | |
XRM-IO34
 | Digital I/O | SCSI-2 68 pin | Back-up batteries can be fitted. 34 discrete digital I/Os LVDS/LVTTL | |
XRM-MDR
 | Digital I/O | MDR 26 pin | Back-up batteries can be fitted. 25 discrete I/O Interface | |
| Audio/Video | ||||
XRM-CAMERALINK
 | Single Cameralink Interface | MDR-26 | Back-up batteries can be fitted. Base Cameralink Interface | |
XRM-CLINK-MINI
 | Single/Dual Cameralink Interface | mini MDR-26 | Back-up batteries can be fitted. Full Cameralink interface Dual Base Cameralink interfaces | |
XRM-CLINK-ADV
 | Cameralink and JPEG2000 | mini MDR-26 | Dual JPEG2000 compression decompression devices. Full Cameralink Interface or Dual Base Interface | |
XRM-CLINK-GIGE
 | Cameralink and Gigabit Ethernet | miniMDR-26 and RJ45 | Base Cameralink Interface 10M/100M/1G Ethernet port Simple RS232 Interface | |
XRM-DVI-D-RX
 | DVI Video Capture | DVI | DVI Capture (25-165MHz, 8-bit per channel RGB)| EDID EEPROM DVI Single Link Digital Video Receiver | |
XRM-FCN-C1
 | Eight Full Duplex Serial IO and JPEG2000 | Dual FCN | Dual JPEG2000 compression decompression devices. Octal High Speed Serial Link via FCN connectors | |
XRM-HD-SDI
 | Dual HDTV I/O Interface | BNC | Dual HDTV/SDTV Serial data stream inputs Dual HDTV/SDTV Serial data stream outputs On board 108MHz Crsytal oscillator | |
XRM-VIDEO-IO
 | Video I/O interface | S-Video input DIN and 15-pin Mini-D SVGA output connector | SVGA Output (15-pin mini-D) S-Video Input (mini-DIN) | |
| High-Speed Serial Link | ||||
| XRM-CLINK-GIGE
| Cameralink and Gigabit Ethernet | miniMDR-26 and RJ45 | Base Cameralink Interface 10M/100M/1G Ethernet port Simple RS232 Interface | |
XRM-FCN
 | 8 Full Duplex Serial IO | Dual FCN | Octal High Speed Serial links via FCN connectors | |
| XRM-FCN-C1
| Eight Full Duplex Serial IO and JPEG2000 | Dual FCN | Dual JPEG2000 compression decompression devices. Octal High Speed Serial Link via FCN connectors | |
XRM-HSSDC2A
 | 4 x HSSDC2 links | 4 x HSSDC2 Connectors. | Back-up batteries can be fitted. Quad High Speed serial links (up to 2.5Gbps) | |
| XRM-IO146-ROCKET
| High Density Digital Serial and Parallel I/O | Mictor 152 pin | Back-up batteries can be fitted. 7x High Speed Serial I/O 112 discrete digital I/Os LVDS/LVTTL | |
XRM-OPT
 | Quad Optical Transceiver Interface | Quad Optical Interface | Quad High Speed Optical Transceivers | |
| Communications | ||||
| XRM-CLINK-GIGE
| Cameralink and Gigabit Ethernet | miniMDR-26 and RJ45 | Base Cameralink Interface 10M/100M/1G Ethernet port Simple RS232 Interface | |
XRM-ETH
 | 10/100Mbit Ethernet | Infoport 15w, 38-pin Mictor Connector, RS232 Header | 10/100 Mb Ethernet Interface RS232 Interface 38 discrete digital I/Os | |
| XRM-FCN
| 8 Full Duplex Serial IO | Dual FCN | Octal High Speed Serial links via FCN connectors | |
| XRM-FCN-C1
| Eight Full Duplex Serial IO and JPEG2000 | Dual FCN | Dual JPEG2000 compression decompression devices. Octal High Speed Serial Link via FCN connectors | |
| XRM-FPDP
| Front Panel Data Port Interface | 80 Pin FPDP Connector | Back-up batteries can be fitted. Front Panel Data Protocol Interface | |
| XRM-OPT
| Quad Optical Transceiver Interface | Quad Optical Interface | Quad High Speed Optical Transceivers | |
XRM-RIO
 | Parallel RapidIO Adaptor | 2 x 40-pin Mictor/visionPROBE-II Connectors | Back-up batteries can be fitted. Dual Parallel RapidIO interfaces | |
XRM-RS422
 | RS422 Interface | 50 Pin AMP Connector | Back-up batteries can be fitted. Multiple RS422 Interface | |
XRM-RS485
 | RS485 Interface | 50 Pin AMP Connector | Back-up batteries can be fitted. Multiple RS485 Interface | |
| Memory | ||||
XRM-DDR
 | DDR Memory up to 512MBytes | 38 way Mictor Connector | DDR : Provides between 128MBytes and 512MBytes. Back-up batteries can be fitted. 34 discrete digital I/Os | |
XRM-ZBT
 | ZBT Memory and RS232 Interfaces | Dual RS232 headers | ZBT : Provides 2 independent banks of between 256K and 2048K x 36-bit ZBT pipelined memory. Back-up batteries can be fitted. Dual RS232 Interfaces | |
| JPEG2000 | ||||
| XRM-CLINK-ADV
| Cameralink and JPEG2000 | mini MDR-26 | Dual JPEG2000 compression decompression devices. Full Cameralink Interface or Dual Base Interface | |
| XRM-FCN-C1
| Eight Full Duplex Serial IO and JPEG2000 | Dual FCN | Dual JPEG2000 compression decompression devices. Octal High Speed Serial Link via FCN connectors | |
| Back-up Battery | ||||
| XRM-CAMERALINK
| Single Cameralink Interface | MDR-26 | Back-up batteries can be fitted. Base Cameralink Interface | |
| XRM-DDR
| DDR Memory up to 512MBytes | 38 way Mictor Connector | DDR : Provides between 128MBytes and 512MBytes. Back-up batteries can be fitted. 34 discrete digital I/Os | |
| XRM-FPDP
| Front Panel Data Port Interface | 80 Pin FPDP Connector | Back-up batteries can be fitted. Front Panel Data Protocol Interface | |
| XRM-HSSDC2A
| 4 x HSSDC2 links | 4 x HSSDC2 Connectors. | Back-up batteries can be fitted. Quad High Speed serial links (up to 2.5Gbps) | |
| XRM-IO146
| High Density Digital I/O | Mictor 152 pin | Back-up batteries can be fitted. 146 discrete digital I/Os LVDS/LVTTL | |
| XRM-IO146-ROCKET
| High Density Digital Serial and Parallel I/O | Mictor 152 pin | Back-up batteries can be fitted. 7x High Speed Serial I/O 112 discrete digital I/Os LVDS/LVTTL | |
| XRM-IO34
| Digital I/O | SCSI-2 68 pin | Back-up batteries can be fitted. 34 discrete digital I/Os LVDS/LVTTL | |
| XRM-MDR
| Digital I/O | MDR 26 pin | Back-up batteries can be fitted. 25 discrete I/O Interface | |
| XRM-RIO
| Parallel RapidIO Adaptor | 2 x 40-pin Mictor/visionPROBE-II Connectors | Back-up batteries can be fitted. Dual Parallel RapidIO interfaces | |
| XRM-RS422
| RS422 Interface | 50 Pin AMP Connector | Back-up batteries can be fitted. Multiple RS422 Interface | |
| XRM-RS485
| RS485 Interface | 50 Pin AMP Connector | Back-up batteries can be fitted. Multiple RS485 Interface | |
| XRM-ZBT
| ZBT Memory and RS232 Interfaces | Dual RS232 headers | ZBT : Provides 2 independent banks of between 256K and 2048K x 36-bit ZBT pipelined memory. Back-up batteries can be fitted. Dual RS232 Interfaces | |
Terms and conditions
|
© 2012 Alpha Data, All rights reserved |