 |

> Datasheets
ADM-XRC-4> Xilinx Virtex-4 PMC
|
|
 |
|

|
The ADM-XRC-4 is a high performance reconfigurable PMC (PCI Mezzanine Card) based on the Xilinx Virtex-4LX and Virtex-4SX range of Platform FPGAs. Features include high speed PCI interface, external memory, high density I/O, programmable clocks, temperature monitoring, battery backed encryption and flash boot facilities. A comprehensive cross platform API with support for WinNT/2000/XP, Linux and VxWorks provides access to the full functionality of these hardware features.
|
|
|

| Feature |
Specification |
| FPGA |
Xilinx Virtex-4
LX60, LX80, LX100, LX160 and SX55
FF1148 footprint
|
| PCI
Bus |
Universal PCI rev 2.2 compliant
PLX 9656 ASIC with 66MHz 64-bit PCI bus and 66MHz 32-bit local bus. Twin DMA controllers, FIFO and interrupt controller peak data rate 528MBytes/sec
|
| Memory |
SSRAM
24MByte in 6 independent banks ZBT 6 x 1024K
x 32 bits (4 banks on LX60 and SX55 versions)
Independent SRAM clocks
optional additional 2 banks using XRM-ZBT
SDRAM
Up to 512MB via XRM-DDR
Flash
16MBytes
|
| Front
I/O |
Up to 146 I/O via a range of XRM front
panel adapters
Maximum I/O data rate 40Gb/sec
XRM-IO146 (standard)
Programmable switching levels of 2.5V or
3.3V
|
| Rear I/O |
64 I/O connections via PMC Pn4
connector programmable switching levels
of 2.5V or 3.3V
|
| Clocks |
Local bus clock
programmable up to 66MHz for transfers between
PCI bridge and User FPGA.
High performance user clock programmable up
to 500MHz using LVPECL with very low jitter.
Additional 200MHz reference clock for IOB
delay circuits.
|
| Configuration |
PCI Bus direct to SelectMAP
port
From Flash direct on power up
External JTAG connector |
| SelectMap |
Download and read-back
performance up to 256MB/s peak.
|
| Encrypting |
Dual battery back-up for encryption
keys via XRM
|
| Software
|
Drivers for WinNT, 2000, XP,
Linux and VxWorks
API with template designs in VHDL and Verilog |
| Environmental
|
Temperature
Operating Temperature 0 to +50 degrees C
Non-Operating(Storage) Temperature -40 to +65 degrees C
Operating Humidity 5% to 90% at 40 degrees C non-condensing
Non-Operating(Storage) Humidity 5% to 90% at 40 degrees C non-condensing
EMC
FCC 47CFR Part 2
EN55022 Equipment Class B
|
| Ordering
Information |
ADM-XRC-4/xxxx-yy/m(/IO)
|
| parameter |
description |
options |
xxxx
yy
m
IO
|
Virtex-4 device
Virtex-4 speed
ZBT SSRAM
Front Panel Adapter
|
LX60, LX80, LX100, LX160 or
SX55
10, 11, 12
24
XRM-IO146 (std),
XRM-IO34, XRM-ADC, XRM-DAC,
XRM-DDR, XRM-FPDP, XRM-MDR26,
XRM-ZBT, XRM-RIO, XRM-ETH,
XRM-CAMERALINK
|
|

|
|
|
(C) Copyright 2006 Alpha Data. All Rights Reserved
|
|